Proven Packaging Tips – Using Heat Sealers

Sealing a package to get it ready for shipping can be a good thing to do, but for a lot of people it is quite challenging. Fortunately, by following a few simple tips, you can have everything packed up properly and protect them from damage.

1. Ensure the Product is Heat Seal Safe

Make sure the product to be packaged is heat seal safe. Normally, you do not think about this, but the products you are packaging will be exposed to some heat as well. Even if it is just radiant heat, the items need to be safe and this often means that you will need to read about the product and make sure it will not melt or have any other major issues when the heat sealer is used for the product.

2. Ensure Safety Precautions When Operating the Heat Sealer

Guarantee all the proper safety precautions are taken when operating the heat sealer. Often, you do not realize this, but these sealers do put off quite a bit of heat. Even the smaller home units that you will use for freezers put off high heat that is enough to melt the plastic bag together. Since this is the case, you need to realize that the larger units that are meant for packaging will put off quite a bit more heat. So, you need to make sure you know exactly how to use the product to guarantee that they won’t get burned by the product while trying to get the package sealed and ready for shipping.

bag heat sealers

3. Set the Heating Timer

Ensure the heating timer is set for the package. Most of the time, these will turn off on their own after a short period, but sometimes the larger sealers need to have a timer set manually. This way, you will have a chance to guarantee the item you are using is properly sealed knowing that nothing will damage the product. Without the timer being set up properly, it can be difficult for you to get the item sealed and not harmed because of the heating.

4. Use the Heat Sealer Properly

Make sure that the top jaws of the heat sealers for packaging are mashing down properly on the bottom item. Then, you need to check the item without a bag to make sure they lined up. However, after you get the bag into the sealer, make sure you have it in the proper location and then push the upper jaw down onto the lower jaw until it seals the package or the light goes out. If you didn’t get a good seal, it is because the heat sensor in the item has gone bad or because the package was not placed in the proper location.

5. Check the Seal

Check the seal after the heating has been done. Sometimes, the seal is not complete, and it will allow a little bit of air leakage or another leakage to happen. When this happens, take and use the machine again to reseal the bags. This can be done several times, and it could easily lead you enjoying the seal even more because you do not have to be concerned about the seal being broken or having anything leak into the product.

6. Plug In the Heat Sealer

Finally, before you start to panic if the product does not seal properly, you need to make sure the sealer is plugged into the wall and the outlet has power. So, before you even start to use the machine, check that it is plugged in. Doing this will make sure that you will get the right results from the sealer and guarantee the item you will ship out is sealed properly.

Heat sealing an item for shipment can be a great way to protect it from any type of harm during transit. The problem is that a lot of people are stuck on trying to figure out how to use the heat sealers for packaging because they have never used one before. This is when you should use the above information to make sure you know how to operate it, and this will help guarantee that you are getting the right sealer for your needs without ruining the items you are getting ready to ship out.